A kitchen visualization render gets judged on three things before anyone looks at the layout: the handles, the worktop edge and what the reflections are doing on the fronts. Get those right and a buyer believes the kitchen. Get them wrong and it looks like a catalogue from 2009, however good the light is.
I render a lot of kitchens, usually as part of an apartment set, and these are the details clients and their customers actually zoom into.
Handles are the first thing people check
Kitchen designers know this, and the people buying from them learn it fast. A handle is small, it's repeated twenty or thirty times along a run, and any mistake gets multiplied.
The usual failures are scale and finish. A 160 mm bar handle modelled at 200 mm because someone eyeballed it looks clumsy, and you'd be surprised how often the handle spec isn't in the drawing package at all. I ask for the model number or at least the centre-to-centre spacing. If it's a profile handle, a J-pull or a gola rail, I need the section, because a gola channel 20 mm deep reads completely differently from one at 35 mm.
Finish is harder. Brushed brass needs anisotropic reflection, meaning the highlight stretches along the brushing direction, and if that direction is wrong (vertical brushing on a horizontal bar) the eye catches it even if the viewer can't say why. Matte black has the opposite problem: render it truly matte and it turns into a flat black hole. A little roughness variation, somewhere around 0.35 to 0.45 in Blender's Principled shader with a faint smudge map, keeps it reading as metal.
Worktop edges: thickness, bevel and the joint nobody models
The worktop is the biggest horizontal surface in the room, and its front edge sits right at eye level in most camera angles. A 12 mm sintered stone top and a 40 mm laminate top tell two very different price stories, so the thickness has to be right before anything else.
I bevel every worktop edge, usually 1 to 2 mm on stone and a slightly softer radius on laminate. Without it the edge catches no light and the top looks like a sheet of paper laid on the cabinets.
Then there's the joint. Long L-shaped stone runs have a seam somewhere, because slabs only come so long. I don't always show it. But when a kitchen maker is using the render to sell the job, they sometimes want the seam placed where it will really be, because their customer will ask.
That's a conversation worth having before the render, not after.
Veining direction on a marble-look top matters too. Bookmatched veining down an island's waterfall end is a selling point, so it's worth placing the texture by hand rather than letting a random UV map scatter veins across the corner.
Reflections on the fronts: the bit that sells or kills it
Gloss is where most kitchen renders go wrong.
High-gloss fronts are a mirror. Whatever is opposite them in the scene shows up, and in an empty 3D scene that's usually nothing, or a grey void, or an untextured wall. A real kitchen reflects a window, a dining table, a pendant light. So I model the room behind the camera even though it never appears directly. Not in detail, just enough: a window opening with daylight coming through, a table shape, some wall colour. On a lacquered front that's the difference between a believable reflection and a strange dark streak.
Here's the mistake I see most often. People push the gloss to perfect because the brochure says "high gloss". Real lacquer has a faint orange-peel texture and softens at grazing angles, so I keep roughness around 0.03 to 0.06 and add a very gentle bump. Perfectly mirror-flat fronts look like glass, and glass-looking fronts look cheap.
Matt fronts have their own trap. They need some sheen at grazing angles, otherwise a long run of handleless matt doors becomes one flat block of colour and the door lines disappear. The shadow gaps between doors, usually 2 to 3 mm, need to be modelled, not painted on.
Under-cabinet lights, taps and the small stuff
Under-cabinet LED strips are in almost every kitchen spec now, and they're easy to overdo. In real life a warm 3000 K strip under a wall unit throws a soft pool onto the worktop that fades out within about 300 mm. In a render it's tempting to crank it up so it reads, and then the worktop looks like it's glowing from inside. I keep the strip a touch dimmer than feels right and check it against the daylight from the window, because the two have to live in the same frame.
Taps deserve more care than they get. A tap is chrome or brushed steel, it sits at the centre of the sink run and it often ends up close to the camera. A generic gooseneck where the client specified a boiling-water tap with a square spout is exactly the kind of detail a buyer notices. The sink matters as well: an undermount sink shows a clean stone edge, an inset one shows a rim, and getting that wrong changes the look of the whole worktop.
Small stuff, but it's what people zoom into.
What a kitchen render costs and where the time goes
My interior renders start from EUR 250 per camera angle, and kitchens fall under that. A typical apartment set of three interior views, kitchen included, comes to EUR 675 because the 10% discount applies from three combined renders. Two consolidated revision rounds are included, and I aim to send the first preview about three business days after a complete brief.
The time on a kitchen goes into materials and small parts. Last autumn I did one where the designer specified a fluted glass wall cabinet, a brass gola rail and a sintered top with a waterfall end. The cabinet carcasses took an hour. The materials took most of a day, mainly because the fluted glass needed a proper refraction setup to hold up at 4000 px.
That's all inside the per-view price. It's just where the effort sits. The full breakdown is on the architectural rendering prices page.
What I'd actually send with a kitchen brief
If you're a kitchen maker or an interior designer briefing me, this list saves the most back-and-forth:
- Plan and elevations with heights, including plinth and worktop thickness.
- Handle model, or a photo with dimensions, and the finish.
- Front material and finish name, with the supplier code if you have it.
- Worktop material, edge profile and where the joints fall.
- Appliance models, at least for the oven and hob.
- One or two reference photos of the mood you're after.
The appliances surprise people. A built-in oven is a big flat front at eye height, and a generic one sitting where a specific brand should be is something any kitchen salesperson will spot immediately.
Want to see how a kitchen works inside a full open plan? The penthouse open-plan study shows a kitchen sharing light with a living area, and my interior rendering services page explains what's included per view.
Send the drawings through the quote form and I'll come back with a non-binding price and the questions I'd need answered first.
