Home / Blog / Guide

Material Samples for Renders: Photo, Code or Physical Swatch

Published November 15, 2026 · 8 min read

For materials and finishes for renders, send a code where one exists, a photo where it doesn't, and a physical swatch almost never. A manufacturer's product code beats a photo for paint, laminate, tiles and worktops. A straight-on photo beats a code for natural stone, veneer and fabric. Posting me a sample is only worth it for a handful of finishes where sheen is the whole point.

That's the short version. The longer one is about why each of those is true, and how a five-minute material list saves a revision round.

Why "grey marble" isn't a material

Earlier this year I rendered a bathroom from a good set of drawings and a brief that said, for the walls and vanity top, "grey marble". I picked a pale grey stone with soft white veining, built the room around it and sent the preview on day three. The client had already bought the slabs. They were a dark charcoal limestone with sharp white veins, close to black in some light. Nothing about the preview was wrong and all of it had to change: the stone, then the brass tone that sat next to it, then the lighting, because a dark room needs different light from a pale one.

One word cost a round.

Every interior price I publish includes two consolidated revision rounds. I'd much prefer you spend those on composition, styling and mood than on telling me the oak was meant to be walnut. Materials named properly at the start are the cheapest improvement there is.

When a code is the best thing you can send

Anything made in a factory has a name, and the name is better than any picture of it. Paint has RAL, NCS or the maker's own colour name. Laminates and melamine boards have decor codes: something like Egger H1180 ST37 tells me the oak pattern and the surface texture in one string. Porcelain tiles have a collection, a colour, a size and a finish. Engineered quartz has a brand and a colour name.

With a code I can open the manufacturer's page, see the official swatch, read the sheen level and the format, and often download a texture that tiles correctly. A phone photo of the same board gives me your kitchen's lighting, your phone's white balance and a slight blur.

So for manufactured finishes, a product link wins.

Two details people leave out, and both matter more than the colour:

  • the size of the unit: a 600 × 1200 mm tile and a 300 × 600 mm tile in the same colour make very different walls, and a 190 mm plank reads differently from a 120 mm one
  • the finish: matt, satin, polished, brushed, textured. A polished and a matt version of the same tile look like two products once light hits them

Add the grout or joint colour if you know it. A 2 mm joint in a matching grey disappears, the same joint in white turns the wall into a grid.

When a photo is better than a code

Natural materials don't repeat, so a code only gets me to the right family. "Calacatta" covers slabs that are nearly white and slabs with veins as wide as your hand. Veneer is the same: two sheets of smoked oak from different logs can be a full shade apart, and the figure (straight grain, crown cut, quarter cut) changes the look of a whole wall of joinery.

If you've chosen the actual slab or the actual veneer, photograph it. If you haven't, send the supplier's photo of the one you liked and I'll treat it as the target.

Fabric and leather are photo materials too. I need two shots: one close enough to see the weave, about 20 cm away, and one of a larger piece so I can judge how it drapes and how much it shines. Boucle, velvet and linen all behave differently under a window, and the weave tells me which one I'm looking at better than the word does.

The spa bathroom study in my portfolio is a fair example of why this matters: the black marble and the white oak carry the whole image, and each was matched to a specific reference, not picked from a library by name.

How to photograph a sample so it's usable

Most sample photos I get are taken in the evening, under a warm ceiling light, at an angle, with the phone's shadow across them. I can work from that, but I'm guessing at the colour.

A usable photo takes one minute. Put the sample near a window in daylight, out of direct sun. Lay a sheet of plain white printer paper next to it, touching, so I have a known white in the frame and can correct the colour cast. Put a ruler or a coin on it for scale. Shoot straight down, phone parallel to the surface, no flash. Then take a second shot at a low angle towards the window, because that one shows me how glossy the surface is and whether it has texture.

Two photos per material, then. Flat for colour and pattern, angled for sheen.

Send them as files, not pasted into a chat app that squeezes them to 1600 px. For stone and timber the full-resolution original is what lets me build a texture from your photo instead of approximating it.

The physical swatch: when posting one earns its stamp

Rarely. I work remotely for clients in Vilnius, London, Barcelona and elsewhere, and a parcel takes four days to tell me what two good photos tell me in four minutes.

There are real exceptions. Metallic and pearlescent paints, where the colour shifts with the viewing angle. Hand-applied plasters such as tadelakt or Venetian finishes, where the surface movement is the product. Brushed and aged metals. Fabrics with a strong pile. In those cases the thing I need to reproduce is how the surface reacts to light across a range of angles, and no single photo holds that.

Even then, a ten-second video of the sample being tilted near a window gets most of the way there.

A paint code is less exact than you think

This is the bit that surprises people. You send RAL 9010, I enter RAL 9010, and in the render the walls look cream. Did I get it wrong?

No. A paint code describes the paint, not what your eye sees in a particular room. The same white wall is cool blue-grey next to a north window at noon and warm ivory under 2700 K lamps in the evening, and a render reproduces that honestly. An oak floor bounces warm light up onto white walls, too. Real rooms do exactly this, which is why paint shops tell you to test a patch on the wall before buying 20 litres.

The second variable is your screen. A phone with a warm night mode switched on shifts every colour in the image. If a colour decision matters, look at the preview on a laptop or monitor in daylight, with any evening tint turned off. What I do with a code is set the base colour from it and then light the room properly. If you need the white to read as white in the final image, tell me, and I'll balance the picture for that. It's a look decision, not a material error.

What I'd send for a typical kitchen and living room

If I were the client, I'd put one line per surface in a single message or PDF and stop there. Something like this:

  1. Walls: paint brand and colour name or code, matt
  2. Floor: product link, plank size, laying pattern (straight, herringbone)
  3. Kitchen fronts: board maker and decor code, or lacquer colour and sheen
  4. Worktop: brand and colour for quartz, slab photo for natural stone, plus thickness (12, 20 or 30 mm)
  5. Splashback: tile link with size and grout colour, or "same as worktop"
  6. Metals: taps and handles in brushed steel, black or brass
  7. Sofa and curtains: fabric photos, close and wide

Seven lines. That covers about 90 percent of what the camera will see.

What I wouldn't send as a material reference is a Pinterest image on its own. It's useful for mood, and I do want it, but a styled photo with unknown lighting and heavy editing can't tell me which oak that is. Send it with a note: "this feeling, these actual products."

And if something isn't chosen yet? Say so. "Floor undecided, something like this" is a perfectly good brief, and I'll pick a sensible match and flag it in the preview so nobody mistakes my guess for a decision. Undecided is fine. Unmentioned is where rounds get lost.

None of this changes what a render costs. An interior starts from EUR 250 per camera angle with the two revision rounds included, as set out on the architectural rendering prices page, and my target for a first preview is three business days after a complete brief. A material list is a big part of what makes a brief complete. If you have drawings and even half of the list above, send them through the quote form and I'll come back with a non-binding price, or read how the interior rendering services are scoped first.

Questions people ask

Do I need to choose every material before ordering a render?

No. Name what's decided and mark the rest as open with a rough direction. I'll propose a match for the open items and point them out in the preview, so you can confirm or change them within the included revision rounds.

Can you match a specific tile or worktop from a product link?

Yes, that's the easiest case. A link gives me the official swatch, the format and the finish, and many manufacturers publish textures. Add the tile size and grout colour, since those change the look of the wall as much as the colour does.

Why does the paint colour in my render look different from the colour chart?

Because the render shows the paint under the room's light. Warm lamps, a timber floor or a north-facing window all shift how a white or grey reads, as they do in a real room. Check the image on a monitor in daylight, and tell me if the colour needs to read neutral.

Is a phone photo of a sample good enough?

A careful one is. Daylight near a window, no flash, a sheet of white paper beside the sample, a ruler for scale, one shot straight on and one at a low angle. Send the original file so the full resolution survives.

Got drawings and a deadline?

Send the plans and the number of views you need. You get a written quote before any work starts. Interior renders from €250, exterior from €450 per camera angle.

Request a quote See all prices

More from the blog